We are using this for cleaning Musical Instrument parts such as Silver Plated Brass Mouthpieces, Plastic & Hard Rubber Woodwind Mouthpieces, Silver Plated and/or Lacquer coated Brass Musical Instrument parts. The unit arrived quickly and was packed adequately. Set-up was quick and easy. We added a brass fitting to the drain to attach a clear vinyl drain hose since this unit is being used on a counter top. This is our findings after using it for a month about a few hours each day.
The settings for the temperature are in Celsius so many will have to convert temperature accordingly. It does take a lot of time (30+ minutes), to heat up the solution (40 C), so plan accordingly if your cleaning requires heat. Conversely, if you are doing several batches of cleaning, be careful about the unit going over the set temperature, (according to the read out on the panel). We've turned it off in between uses to avoid burning out the heating element.
The capacity is about 2-1/2 gallons but depending on the volume of the items you are cleaning, you don't need to fill it completely. A benefit I didn't realize with the shape of the tank is when a cleaning cycle is finished, you can pull the basket up and turn it 90 degrees and place it on the ledge to allow all the cleaning fluid to drain out before rinsing off the items.
The cleaning power of this unit seems to be adequate for general use. Longer or repeated cleaning periods may be necessary for some items. It is dependent upon the severity of the items to be cleaned and what solution you use. We are going after calcified deposits inside brass tubes and have experimented with a few different solutions. So far, our best results have been with a mix of White Vinegar, Baking Soda and Sea Salt. Another good cleaning solution is a dilution of Simple Green HD and Dawn Ultra Dish Detergent. Both of these have worked well being heated between 35-45 degrees Celsius at 10-15 cleaning times.
While some reviews complained about the noise level, being that this is used in a shop area, we did not find it overly loud. With the lid on, the sound was slightly lower and it helps retain the heat inside to aid in the cleaning. You will not be able to have a conversation on a phone near it as the Ultrasonic waves cancels out most microphones but standing and few feet away will solve this.
Draining the unit and changing fluid. As previously mentioned, we added a brass hose fitting and a large clear vinyl tube to drain into a 3 gallon bucket. The unit will have to be tilted towards the drain to remove all the fluid. A towel to wipe down the tank clean and an occasional use of a Stainless Steel Cleaner / Polish like Sprayway helps keep everything neat and water spot free. (We have HARD Water)
Lastly, the issue about the power switch on the backside of the unit. It is a minor inconvenience but somewhat of a safety as well. It forces you to keep the immediate area around the unit clear, which helps with the airflow ventilation around the unit. (It does get warm). Also, if you spill fluid while removing the basket or items you are cleaning, you are less likely to spill on the backside since you are pulling items towards you in the front.
General Impression is that we are pleased with the unit and hope that it will last for a while. For the size of the unit, it will clean most items well but could use more powerful transducers to create stronger cavitation bubbles and heat up quicker. For the price, it is hard to beat and should serve the average user well.
I put my Z50 carb in a chemdip can for 24 hrs. Took it out and cleaned all passageways and surfaces with carb cleaner. Then I put it in the magic box and immediately saw much more crud come off! Made a 44 year old carb look and work brand new!
This bad boy doesnt fool around. Ive used it to clean out disgusting brass that I picked up on the range and weber carburetor bodies and parts that coming out looking new. Wish it were large enough to put engine blocks in.
Many people have said it is loud. Well, duh, it is a SONICation bath! It is no louder than any I've used. Mine is in a separate room in my shop. I wear ear protection when I'm near it. That is more for comfort than necessity. It is not that it is loud, but it is an irritating sound. That is all normal though. It does a great job cleaning tools and clock mechanisms. I was surprised that not only is dirt removed, but the brass seems polished! I love it. The drain fitting was easy to get a threaded barb from the Home Depot. Good tool.
I just bought this to see how it worked. I'd been using a small Harbor Freight unit and needed something bigger. First impressions are good. I used Simple Greener cleaner in it. I shoved a pretty dirty distributor in it. I let the water get HOT and then ran it for 45 minutes. It came out spotless. What I like about it is the timer function. You can set it and walk away.
My only critique is it is a bit loud but not overwhelming. For as good as it cleaned my parts, I'll be glad to tolerate it. I will save a lot of time cleaning parts with this.
Feature Product
- Tek Motion Stainless Steel Ultrasonic Jewelry Cleaner w/ Heater Timer 15L BX DMG
Description
① STRONG CLEANING POWER - 6 industrial grade ultrasonic transducers (6x60 W=360W), easily and thoroughly cleans your valuables and small items; designed with latest technologies, this professional ultrasonic cleaner is expert in cleaning, maintenance, oxidation, extraction, cavitation and more, which makes the digital cleaning machine accommodate users' different needs. ② EXTRA-THICK TANK: Extra-thick 0.06 in. (1.5mm)stainless steel tank with 3.97 Gal. (15L) volume, durable and sturdy to last for years to come, the integrated cleaning basket is perfect for keeping your jewelry, glasses, capacitors, PC boards, razors, tattoo machine, laboratory equipment, carburetor, contact lenses, fuel injectors, watches, pipettes, or dentures in place. ③ CONVENIENT SETTINGS: 68-140℉ cleaning temperature recommended for improved cleaning performance, the user-friendly pre-set cleaning time options (1-30 minutes) provide you with convenience. ④ SAFE USE: Dual fuse protection to prevent burn-out, turning on/off the cleaner frequently is NOT recommended; in the event of fuse damage, please change one to get the machine back to work.
Very good value. Works well. Heats up HOT! Was able to fit a full rack of 1982 Yamaha Maxim 650 carbs into it (12"). Louder than anticipated.
works great, first run, i ran 2 Arctic cat 440 carbs that have sat for over 10 years all gummed up, with a mix of simple green and hot water, for 30 min, with the heater on at 40c. pulled them out installed them and they fired right up.
Works amazing. Takes forever to get up to temp. (Up to an hour). Very Very Noisy. Can hear it in the house 50 yards away from a closed up insulated shop. But it works!
I use this for cleaning carbs and other engine parts on a daily basis, it is kinda loud but works great, temp readings are in celcius.
Works great! I put a little simple green in here with some water and this thing will do wonders!