There's two lengths that I've seen with these honda bumper clips. it is really hard finding out which ones are the longer ones. these GOACC clips will work if you need the longer ones. the shorter ones will work but if you can find the longer ones that's what you want or you can settle for these. they are 0.8" and 1.2" respectively for the shorter and longer versions. if you need the longer ones its honda oem part# 91503-SZ5-003. I've bought 3 clips on ebay thinking they were the longer ones because it says 30mm, I have no idea why ebay sellers advertise 30mm since the longest part (the pin in the center) measures only 0.8". I did find some items on ebay and the part number I gave is what you want if you need the longer clips, they are more beefy than these GOACC. the picture shows the OEM longer 1.2" clip in the middle, the GOACC clip is on the right and the shorter ones that every one else sells and falsely say they are 300mm are on the left
These 8mm plastic pins fit my 2010 Honda Civic EX-L front fender splash shields. Amazon said the 10mm ones fit. After ordering a pack and waiting a month, they didn't! These 8mm ones are what you need. They will fit in super tight, but that's what you need.
Used these for my 2006 Honda Recon ATV. They worked better than the OEM clips, and even if the holes are elongated a bit they still provide a snug fit because they expand more than the OEM ones. Also, it's important to note that the part that usually breaks (the head of the inner portion) is reinforced under the head, so they will probably last quite a long time as well. The mating heads are larger than the small ones you'd normally see, and I like that better as well.
All in all you can't go wrong with these. Oh, and these are for 8mm holes, but they'll certainly hold stuff larger than that!
I own a 2016 Ford Mustang and was in a little fender bender that resulted in the built in clips of my car breaking. I was recommended these from a friend that has used these for the same reason. Now nothing is going to look as perfect as it did before the accident but these are a close second, they clip in very easily and make the bumper look like very little damage happened. As you can see in the pictures the first picture is a before picture (no clips) and the second picture is an after picture (clips installed ). They work very well (push the base in first, then the button - if you push the button while installing, the base will collapse), the only reason for the 4 stars is when they are taken out they break easily, but to be honest there is really no reason for removing them in the first place and if there is you can always order more for this great price! (found the exact same brand in a auto part store and it only had a 10 piece set for 8.99 so this is a very good deal)!
These clips are exactly what I needed for my 2014 Impala Limited (old body style). I used these as replacement clips I broke and lost while replacing the cabin air filter, it is nice to have a bag of clips at such a low cost that in the future I don't have to worry about gently working out the clips anymore. Thank you!
Feature Product
- UNIVERSAL FIT: These universal push-type plastic clips will fit on most of auto parts with 8mm hole, hold your parts very tightly
- STURDY AND DURABLE: Made of high-quality black nylon material, anti-wear and anti-corrosion, would not break or crack easily during use
- MULTIPLE USE: Widely used for door trim, radiator shield yoke, fender, bumper, side skirt, grille, engine cover and splash shield retainers
- PRODUCT SIZE: Head Diameter: 20mm/ 0.8 inches; Stem Length: 22.8mm/0.9 inches; Fits Into: 8mm /0.3 inches hole
- PACKAGE INCLUDE: 40PCS Fastener Rivet Clips
Description
Specification:
Material: Black Nylon, suitable for car use
Better replacement for original bumper and fender clips.
Push in type, easy to fasten Bumper Fender Flare and Mud Flap.
Rivet post pressure expands legs for fast and tight fastening
Application:
Car good accessory, commonly used for fitting side skirt, bumper, car fender, engine cover, door trim panel, interior trim panel and various trim panels
They can be used on cars, truck, motorcycles, buses, trains, planes, caravans, etc.
I have a 2012 Chevy Traverse and needed a few new clips for the skirt under the hood. I had to replace my front upper grill due to damage and as part of it's replacement I had to remove the front bumper, as part of it's removal I had to remove the skirt thats under the hood. Holding the skirt were these clips, and being I did not have the proper tool to remove them I broke a few. These clips were an exact match and installed with ease, another great point is my vehicle uses these same size clips in many different areas. With the low price and the fact that you get so many clips in the bag this was an amazing find.
Fits perfectly in the splash shield holes on a 2004 Honda Pilot. Even seems more robust than original rivets. Keep in mind that you'll need both 8mm and 10mm plastic rivets, depending on where you're installing them. I don't recall where exactly between the splash shields, engine compartment and the fenders, but I know I needed both sizes. Now the splash shield doesn't drag on the ground anymore.
I used these fasteners to replace some of the worn-out fasteners on my 2002 Honda Rancher ES. They worked perfectly. If anybody is wondering, the head on this fastener is a good bit bigger in circumference than the head on the fasteners that originally came on my ATV. I really don't mind as I bought them for their function and not for their looks.
The Znder Nylon Fasteners are perfect for attaching mud flaps to pliable fender liners. Drill an 1/8th inch hole through your mud flap center; locate the position of the mud flap on the car; insert one side of the fastener into the pliable liner; insert the other side of the fastener through the mud flap and snap into place against the liner. A second or third Znder Nylon Fastener should be applied to keep the flap from rotating off perpendicular to the deck. May also be secured with adhesive along with fasteners to insure Pit Bulls don't tear the mud flaps loose from the truck or car. Carry on.
When we replaced the battery in my car the clips went flying! I got these praying they would work. They worked for everything under the hood on my 2006 Nissan 350Z battery compartment cover, all the clips that gave out over the years that hold the front bumper all the covers that Nissan covers EVERYTHING under the hood! Because anyone that owns a Nissan knows that Nissan LOVES covers! They also worked in the trunk area. Get these in case you have to change the tail lights your self. You can never save the one that are already there! For this price, it’s worth it
